Furman M-10LxE Overview The Furman M-10Lx E is a low-cost AC power conditioner that has front-panel pop-out LEDs. The Furman M-10Lx E protects against electrical spikes, surges, RFI, and EMI noise. It has 10 IEC outlets spread across two separate banks, as well as one additional front outlet. The M-10Lx E power conditioner is rated for a total load of 10 amps, and the input has a 10 amp IEC male connection. Instrument Rigs You have a rack for your effects, preamps, and tuners. Are you going to plug that into the wall? Your setup will go up in smoke with a single large spike. The standard level surge/spike protection protects your equipment from the spikes and surges that are prevalent at concerts and practice venues. With basic Furman RFI/EMI filtration, your amp will provide a quieter tone free of pops, crackles, and the local radio station. Plus, twin pull-out lighting lets you see your rack without turning on the lights in the home. Recording Can’t figure out where that noise is coming from? Does your mix sound flat? With typical Furman RFI/EMI filtration, you can reduce the noise floor generated by filthy AC power entering your console or DAW. Standard-level surge and spike prevention prevents your delicate digital equipment from acting strangely or burning out as a result of ordinary spikes and surges. With a 10A capacity and eleven total outlets, it can power your whole home studio. DJ Equipment Bars, clubs, and other event venues have some of the worst power available; from air compressors cycling on and off to light displays dragging current loads up and down, the AC power may put a strain on the circuits in your setup. Furman standard level protection and filtering keep the bad things out, and the twin pull-out front panel lights allow you to view your board and gear without taking away from the performance on the dance floor. Pro Audio When you’re out there performing, you never know what type of power you’ll get. Mobile rigs wear down with time, which is why it’s a good idea to invest in conventional Furman protection and RFI/EMI filters. It ensures that your equipment is secure and sounds clean. Whether you’re setting up a gig at a local bar or preparing the church band for their next service, make sure they have the electricity they can rely on. Furman M-10Lx E Rackmount Power Conditioner Features: Noise Filtration: AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI) Surge Protection: Spike and surge protection guarantees equipment remains safe and your electricity stays clean. 11 Total Outlets: 10 rear panel outlets and 1 front panel convenience outlet 10 Amp Rating: 10 amps, including circuit breaker. Protection OK Indicator: The front panel indicator LED indicates that your equipment is being safeguarded. Front Panel Pull-Out Lights: Two retractable LED lights with dimmer control for easy rack illumination
